IOT (182)

Connection method:Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.Note:After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need...

TNY264PN, AC/DC Converters IC

FEATURES 0.8uSec Instruction Cycle (CLK Cycle Period @200nSec) Single +5V Power Supply (TMP8085AP-2: 5V+5%, TMP8085AHP-2: 5V 10%) On-Chip Clock Generator (with External Crystal or RC Nevork) On-Chip System Controller. Cycle status...

Features Fastest TM4C Series MCU - 120 MHz ARM Cortex-M4 CPU w/ Floating Point Integrated 10/100 Ethernet MAC+PHY & scalable, cloud-based application solution 1MB Flash, 256KB RAM, 6KB EEPROM, 2x12-bit...

Features: High Performance TM4C123GH6PM MCU: 80MHz 32-bit ARM Cortex-M4-based microcontrollers CPU 256KB Flash, 32KB SRAM, 2KB EEPROM Two Controller Area Network (CAN) modules USB 2.0 Host/Device/OTG + PHY Dual 12-bit 2MSPS ADCs, motion control...

Specification: Interface Description- 1. VCC connect to 3.3V-5V- 2. GND connect to GND- 3. DO digital output interface (0 and 1)- 4. AO analog output interfaceInstructions- 1. Thermistor module is...

Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set...

PN532 NFC Module Features and Specifications 80C51 microcontroller core with 40 Kbyte ROM and 1 Kbyte RAM Highly integrated analog circuitry to demodulate and decode responses Buffered output drivers to...