DESCRIPTION
Connection method:
Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.
Note:
After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine) please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device.
Voltage: 5V. All you have to do is pop the plastic cover near the USB connector and re-solder the power from 5v to 3.3v to support 3.3v parts.
Package included:
1 x USB to RS232/TTL PL2303HX cable adapter module
ADDITIONAL INFORMATION
| Color: |
Blue, Purple, White |
| Size: |
20, 24 |
| Material: |
100% Polyester |
